Beefy Steering Knuckles!
Our rally customers have been complaining that AE86 stock steering knuckles are just not up to the task. Too many bent factory steering knuckles means too many trips to the alignment shop.
Our Australian customers recieved primarly manual racks, so need power steering knuckles for more steering angle.
So we deliver! Our new beefy AE86 steering knuckles!
These are the same length as the power steering models. Paired with a manual rack, these will provide tons of steering angle!
Solid steel construction, 20mm thick! Good luck bending these!
All angles and tapers match the OEM specs for direct fitment.
Price is $120 per pair.
All our outer tie rod sets now come with these knuckles standard, as well!
posted by Gabriel Tyler @ 4:45 PM
-
4AG 20V WATER LINE KIT!
 We have finished up our 20V water line relocation kit!
Comes with absolutely everything you need to run the water lines when mounting a Silvertop or Blacktop 20V into an AE86!
This kit runs the water lines under the intake manifold so they are out of sight and stay cooler. This kit flows the water in the direction that the 20V was intended to flow. Through the head first, then the block for cooler charge temps and more HP!
This kit allows you to use the OEM 20V water pump, thermostat and all OEM sensors. This kit also allows you to retain the heater in the AE86. No fuss, just a direct bolt on kit.
Comes with all block off plates, gaskets, clamps, nuts and bolts, and even includes new silicone radiator hoses!
Price is $680 for the complete kit!
posted by Gabriel Tyler @ 1:31 PM
-
280ZX TC Rods now availalbe!
Same crazy beefy construction as all our other TC rods!
See here for details!
http://www.technotoytuning.com/productdetail.php?p=668
Now available for the 280ZX!
$200 for the pair.
posted by Gabriel Tyler @ 2:55 PM
-
KP61 Starlet 4AG Conversion Motor Mounts!
Techno Toy Tuning is proud to offer our KP61 KP60 Starlet 4AG motor mounts!
These motor mounts will make the 16V Bigport, Small Port, 4AGZE, Silvertop 20V and Blacktop 20V 4AG motors a direct swap onto the Starlet Crossmember.
These are fully fabricated from heavy guage steel and will not bend, break or flex on you.
These will hold up to any abuse you can throw at them, including all forms or road and rally race use.
These units are powdercoated in gunmetal color for a beautiful look and durable finish!
Price is $160 for the set.
posted by Gabriel Tyler @ 11:44 AM
-
Lotus Parts! New Product Development!
Due to the untimely demise of the wife's very trick MR2 Spyder at the hands of a utility truck and a guardrail, we ended up in the market for another ride.
We bought a 2005 Honda S2K....and it just wasn't right. Not the car for us.
We needed something more like the Spyder. Once you get used to super light and quick, it's hard to change up to a heavier car.
She took a spin in the Lotus Elise and got out of the car with a huge grin. Said she had more fun in the 5 minutes in the Elise than the 2 weeks in the S2K. It just felt "Right".
After a bit of looking and some very good luck, we found a great deal on a Lotus Exige with the Blackwatch Racing supercharger installed.
It's ours! It's at home, it's getting driven every day and guess what? We are going to make parts for Lotus cars!
posted by Gabriel Tyler @ 11:18 PM
-
Slotted Rotor and Pad Kits available!
 Looking for an affordable performance braking option for the AE86 Corolla? Here's the ticket!
A full set of crossdrilled and slotted rotors, and a full set of PBR semi-metalic pads for $195!
Tokico HTS now available!
We now have Tokico HTS Available! Infintely adjustable by a allen head screw at the top of the shock.
These are the very Short Stroke Shock option for the AE86 so popular in Japan.
The ride is very smooth and controlled with these shocks.
We can build custom coilovers around the front and provide swift springs around the rear, if you like. (We can not build rear coilovers on these shocks).
Price is $725 a set of four. Sold only in sets of four.
posted by Gabriel Tyler @ 3:49 PM
-
|
